Gallon, Quart, Pint
Gallon, Quart, Pint
Gallon, Quart, Pint
Gallon, Quart, Pint
Gallon, Quart, Pint
Gallon, Quart, Pint
Gallon, Quart, Pint
Gallon, Quart, Pint
Gallon, Quart, Pint
Products on this page may not be available in your region.
Available in 9 brighter than normal colors which "glow" vividly under ultraviolet lights, Rosco Fluorescent Paints can create a wide range of exciting effects. They can be used to create special effects using ultraviolet black light or combined with other Rosco Scenic Paints to make the colors more vibrant. Fluorescents use the same high quality, water-base, vinyl acrylic binder found in Off Broadway Paints. It is suitable for use on most surfaces after the surface has been properly prepped.
Finish: Flat/Matte
Solvent: Water
Binder Type:Vinyl Acrylic
Dilution: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint and may reduce the brightness of the "glow."
Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic color effects.
Application: Stir contents well before use. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
Film Thickness: 2 mil. dry film.
Coverage: Approximately 300 sq. ft. per gallon (28 sq. m. per 3.79L), depending on application method, substrate and thickness of the application.
Avg. Dry Time: At 75°F (24°C). Dries to the touch in 30-45 minutes. Can be recoated in 1-2 hours.
Clean-up: Soap and water.
Shelf Life: Minimum shelf life for unopened, sealed paint is approximately 24 months when stored in a temperature controlled location.
Packaging: Gallon, Quart and Pint Cans (3.79L, 0.946L and 0.473L).
Fluorescent pigments will degrade from prolonged exposure to ultraviolet light. Avoid direct sunlight where possible.
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.
* Invisible Blue is a milky white paint that fluoresces to a pale blue under blacklight. When painted over light colored surfaces, Invisible Blue is difficult to detect. However, it can be seen when painted over dark or black colors.
Product Numbers
150 05779 0016 |
Fluorescent Paint White - Pint |
150 05780 0016 |
Fluorescent Paint Red - Pint |
150 05781 0016 |
Fluorescent Paint Orange - Pint |
150 05782 0016 |
Fluorescent Paint Yellow - Pint |
150 05783 0016 |
Fluorescent Paint Green - Pint |
150 05784 0016 |
Fluorescent Paint Blue - Pint |
150 05785 0016 |
Fluorescent Paint Invisible Blue* - Pint |
150 05786 0016 |
Fluorescent Paint Pink - Pint |
150 05787 0016 |
Fluorescent Paint Gold - Pint |
150 05700 0KIT |
Fluorescent Paint Kit |
Case Study: Fluorescent Painting Techniques For Creating Realistic Neon Scenery
Case Study: 4 Fluorescent Paint Testing Results To Brush Up On Before Painting UV Scenery
Case Study: How to Create Durable, Vibrant, and Water-Resistant Halloween Décor
Case Study: Blueprint UV Blog
Case Study: Invisible Moon
Please complete this form
Professional quality scenic fitches at an affordable price
Iddings brushes are an ideal choice for students, teachers or professional scenic artists.
These low cost scenic liners, or fitches, are carefully manufactured in the United States with long natural bristles to yield a smooth, even stroke. They can be used on a variety of stagecraft materials, including muslin, canvas, lumber and such non-porous surfaces as plastics and metal.
Because the bristles are natural, not nylon, Iddings brushes will become fully charged with scenic paint that is thinned with water, such as Iddings Deep Colors casein paint, Off Broadway, or Supersaturated Roscopaint. Each Iddings brush features a full head of tapered bristles, offering the artist an option of painting a wide or thin stroke.
Seamless nickel ferrules keep the bristles tightly bundled for effective use. Polished, sealed handles have the right heft for students and scenic artists and resist wear and damage.
Iddings brushes should be washed in warm (not hot) water immediately after use and rinsed until all traces of paint have been removed. They should be laid flat or hung by the handles for drying. Periodic cleaning of the brush head and soaping the bristles into place after cleaning will aid in maintaining its original shape, prolonging the life of the brush.
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.
Your request is important to us.
We will respond as soon as possible during regular business hours.
Need help right away? Check out our frequently asked questions page here: FAQs