Products on this page may not be available in your region.
DMG DASH FIRMWARE UPDATE
Good news! You can now update your DMG DASH using the fixture’s USB-C charging cable instead of only via Bluetooth. Download the Firmware Update to a PC and follow the Firmware Instructions below to get started.
See download buttons below.
FIRMWARE DOWNLOADS
Products on this page may not be available in your region.
DMG MAXI Power, Dimming & Control Accessories
DMG MAXI Mounting Accessories
DMG MAXI Beam Control Accessories
Please complete this form
External power supply that mounts on the back of a DMG MAXI using the velcro straps on the fixture. An additional fastening plate is also included for permanent installation onto the fixture.
The DMG MAXI Power Supply Unit features a handle and a standard 3/8-16 thread for independent mounting off of the fixture. It also features a Neutrik PowerCon True 1 Inlet/Outlet chassis mount connector for AC daisy chaining using PowerCon Cables.
|
Size: |
13.7″ x 2″ x 3.5″ |
|
Weight: |
4lb (1.8kg) |
|
Input / Output Voltage: |
100 to 240 VAC / 24 VDC |
|
Connector: |
Neutrik PowerCon True 1 Inlet/Outlet |
|
Housing Material: |
Aluminum housing |
2m 3-pin XLR cable that delivers DC power from the DMG MAXI Power Supply Unit to the DMG MAXI.
|
Length: |
5 ’ (1.5 m) |
|
Weight: |
0.4 lb (0.2 kg) |
|
Cable Gauge: |
3*1.5mm² |
|
Max Load: |
15 A |
|
Sleeving Material: |
PVC |
0.5m 3-pin XLR cable that delivers DC power from the DMG MAXI Power Supply Unit to the DMG MAXI.
|
Length: |
19 " (0.5 m) |
|
Weight: |
3.5 ounces (0.1 kg) |
|
Cable Gauge: |
2*14AWG + 1*20AWG |
|
Max Load: |
15 A |
|
Sleeving Material: |
PVC |
XLR 3 pin 2m DC cable going from the DMG MAXI power supply unit (PSU) to the DMG MAXI headlamp.
|
Length: |
6.5’ (2m) |
|
Weight: |
0.7lb (0.3kg) |
|
Cable Gauge: |
2*14AWG + 1*20AWG |
|
Max Load: |
15 A |
|
Sleeving Material: |
PVC |
Standard 10mm Lollypop male mount featuring 360° single ball head with 16mm receiver.
Maximum Weight Load 20 kg.
Universal mounting plate. Mounts on the back of the DMG MINI™, DMG SL1™, DMG SL1 SWITCH™ & DMG MAXI™.
|
Size: |
1.5″ x 2.3″ x 2.3″ |
|
Weight: |
1.10lb (0.74kg) |
Goose-Neck 16mm Female Receiver with 360° single ball action – ideal for c-stand mounting.
This steel mounting accessory has a maximum capacity of up to 33lbs (15kg).
Mounts onto DMG MINI™, DMG SL1™, and individual DMG MAXI™ fixtures using our unique quick-lock system.
|
Size: |
5.5″ x 3″ x 3″ |
|
Weight: |
2.2lb (1kg) |
A handle that mounts onto DMG MINI™, DMG SL1™, and individual DMG MAXI™ fixtures using our unique quick-lock system.
Made of 100% aluminum, the handle provides a very comfortable hold.
Ideal for any moving situation, or locations where a stand doesn't fit.
|
Size: |
5.9″ x 3.5″ x 2.4″ |
|
Weight: |
0.9lb (0.4kg) |
Hybrid version of the lollypop mount, compatible with 28mm and 16mm standard receivers and spigots.
|
Size: |
6.5″ x 3.1″ x 3.1″ |
|
Weight: |
2.4lb (1.1kg) |
|
Material: |
Aluminium and stainless steel |
Pole Operated Yoke for DMG MAXI fixtures, with 28mm baby pin spigot.
|
Size: |
55.5″ x 21.4″ x 4.7″ |
|
Weight: |
10.5lb (4.8kg) |
|
Material: |
Steel |
Pole Operated Yoke for 2 DMG MAXI fixtures, with 28mm baby pin spigot.
|
Size: |
55.5″ x 29.1″ x 4.7″ (141.1cm x 73.9cm x 12.1cm) |
|
Weight: |
11lb (5kg) |
|
Material: |
Steel |
Yoke for DMG MAXI light, hybrid 16mm and 28mm detachable spigot.
|
Size: |
52.1″ x 17.6″ x 4.4" |
|
Weight: |
9lb (4.1 kg) |
|
Material: |
Steel |
Yoke with 28mm spigot that assembles two DMG MAXI fixtures together. The Double Yoke includes two LINK2 accessories for the assembly and allows full 360° rotation.
|
Size: |
53.5″ x 24.8″ x 2.5″ |
|
Weight: |
12.1 lb (5.5kg) |
|
Material: |
Steel |
Yoke with 28mm spigot that assembles three DMG MAXI fixtures together and enables full 360° rotation. The Triple Yoke includes four LINK2 accessories for assembly, and two short AC cables for daisy-chaining power.
|
Size: |
57.1″ x 24.8″ x 3.2″ |
|
Weight: |
20.7lb (10.3kg) |
|
Material: |
Steel |
This rigging accessory for the DMG MAXI mounts onto the back of the fixture to stack multiple lights together. The LINK 2 attaches to the side of the assembled units with strong 1/4 turn fasteners and features an arch with a hole for M10 rigging accessories that allow the assembly to be mounted onto pipe, truss, and rigging structures.
The LINK 2 also features side threads that allow for mounting onto yokes - including the DMG MAXI Double Yoke and the DMG MAXI Triple Yoke.
This rigging accessory mounts onto the back of the fixture to attach four DMG MAXI lights together. The LINK 4 attaches to the side of the assembled units with strong 1/4 turn fasteners and features an arch with a hole for M10 rigging acessories that allow the assembly to be mounted onto pipe, truss, and rigging structures.
Note: LINK 2 accessories are necessary in conjunction with the LINK 4 accessories to connect the side/perimeter of the assembly.
Rigid case with wheels for one completely accessorized DMG MAXI. The case features two handles and includes four TSA-approved locks.
|
Size: |
64.5″ x 22.25″ x 10.25″ |
|
Weight: |
32lb (14.5kg) |
The Dome is our most popular diffusion accessory. It slides onto the light replacing the standard flat diffuser. Its round shape makes it the perfect light-softener with a larger spread of 160°.
|
Size: |
46″ x 13″ x 4″ (118cm x 33cm x 10cm) |
|
Weight: |
3.46lb (1.57kg) |
|
Material: |
Thermo-formed 3mm acrylic. |
The Dome for double DMG MAXI.
Barn doors especially designed for the DMG MAXI that easily shapes and directs light.
Strong fixing system with 4 x quarter turn claw that attach to dedicated holes at the back of the fixture.
|
Size: |
46″ x 13″ x 4″ |
|
Weight: |
11.9lb (5.4kg) |
|
Material: |
Steel Frame and Fiberglass Doors |
DoPchoice SNAPBAG for DMG MAXI with MAGIC CLOTH.
|
Size: |
48″ x 15″ x 5″ |
|
Weight: |
3.09lb (1.4kg) |
DoPchoice SNAPBAG for double DMG MAXI.
|
Size: |
66″ x 50″ x 16″ |
|
Weight: |
6.17lb (2.8kg) |
DoPchoice 30°/50° SNAPGRID for DMG MAXI split.
|
Size: |
48″ x 15″ x 5″ |
|
Weight: |
1.89lb (0.85kg) |
DoPchoice 40°/60° SNAPGRID for DMG MAXI split.
|
Size: |
22″ x 8″ x 4″ |
|
Weight: |
2.6lb (1.2kg) |
DoPchoice 30°/50° SNAPGRID for double DMG MAXI.
|
Size: |
48″ x 28″ x 5″ |
|
Weight: |
2.6lb (1.2kg) |
DoPchoice 40°/60° SNAPGRID for double DMG MAXI split.
|
Size: |
64″ x 50″ x 3″ |
|
Weight: |
3.46lb (1.57kg) |
Products on this page may not be available in your region.
DMG SL1 SWITCH Power, Dimming & Control Accessories
DMG SL1 SWITCH Mounting Accessories
DMG SL1 SWITCH Beam Control Accessories
Please complete this form
An external power supply that mounts on the back of a DMG SL1 or DMG SL1 SWITCH and connects to the fixture using a proprietary 2-pin connector.
|
Max Power Draw: |
200 W |
|
Input Voltage: |
100 to 240 VAC |
|
Output Voltage: |
24 VDC |
|
Size: |
6.7″ x 2.4″ x 18″ |
|
Weight: |
2lb (0.9kg) |
|
Housing Material: |
Plastic Housing and Aluminum Mounting Plate |
Dock for mounting two standard V-mount batteries (maximum 17.5 VDC) to provide a nominal 26 VDC output. For use with DMG MINI™, DMG SL1™, and DMG SL1 SWITCH™ fixtures.
|
Size: |
6.1 x 3.7 x 3.1 |
|
Weight: |
1.4lb (0.64kg) |
|
Housing Material: |
Aluminium |
Battery adaptor plates that accept V-mount or Anton/Bauer® Gold Mount batteries. The plates mount onto Rosco DMG MINI or DMG SL1 fixtures using our unique quick-lock system, and the adapters connect to the fixture using a proprietary 2-Pin connector.
|
Size: |
5.5″ x 3.3″ x 1″ |
|
Weight: |
0.7lb (0.3kg) |
|
Housing Material: |
Black Anodised Aluminum and Stainless Steel Screws. |
Basic DC Driver for DMG SL1 SWITCH. Mounts directly onto the back of the light panel with spring loaded system. Chogori input connector and over moulded 8-pin output connector.
|
Size: |
1.5″ x 9″ x 1.2″ |
|
Weight: |
2lb (0.9kg) |
|
Dimming curve: |
Flicker Free at Any FPS 0 to 100% (2 speeds) |
|
Input / Output Voltage: |
12 to 30 VDC / 24VDC Constant Current |
|
Color Temperature: |
3000K - 5600K |
|
Housing Material: |
Black Anodised Aluminum and Stainless Steel Screws. |
POWER - UBB
Advanced DC driver with DMX wired and wireless function (Lumen Radio FX chip) and WiFi / Lan input. Coloured control screen and chogori input connector.
Dimming curve Flicker Free at Any FPS 0 to 100%. 12 to 30 VDC / 24 VDC Constant Current.
Mounts directly to the back of the light panel with a spring loaded system.
Suitable for DMG SL1 SWITCH.
|
Size: |
8.2″ x 4.7″ x 2.3″ (21cm x 12.5cm x 6cm) |
|
Weight: |
2.7lb (1.25kg) |
Links the DMG SL1 SWITCH driver to the DMG SL1 SWITCH light. 8 Pin proprietary connector. Max distance 16 m (48’) without power loss.
|
Size: |
26’ (8m) |
|
Weight: |
2.9lb (1.3kg) |
|
Sleeving material: |
TRVV |
Goose-Neck 16mm Female Receiver with 360° single ball action – ideal for c-stand mounting.
This steel mounting accessory has a maximum capacity of up to 33lbs (15kg).
Mounts onto DMG MINI™, DMG SL1™, and individual DMG MAXI™ fixtures using our unique quick-lock system.
|
Size: |
5.5″ x 3″ x 3″ |
|
Weight: |
2.2lb (1kg) |
A handle that mounts onto DMG MINI™, DMG SL1™, and individual DMG MAXI™ fixtures using our unique quick-lock system.
Made of 100% aluminum, the handle provides a very comfortable hold.
Ideal for any moving situation, or locations where a stand doesn't fit.
|
Size: |
5.9″ x 3.5″ x 2.4″ |
|
Weight: |
0.9lb (0.4kg) |
Standard 10mm Lollypop male mount featuring 360° single ball head with 16mm receiver.
Maximum Weight Load 20 kg.
Universal mounting plate. Mounts on the back of the DMG MINI™, DMG SL1™, DMG SL1 SWITCH™ & DMG MAXI™.
|
Size: |
1.5″ x 2.3″ x 2.3″ |
|
Weight: |
1.10lb (0.74kg) |
Hybrid version of the lollypop mount, compatible with 28mm and 16mm standard receivers and spigots.
|
Size: |
6.5″ x 3.1″ x 3.1″ |
|
Weight: |
2.4lb (1.1kg) |
|
Material: |
Aluminium and stainless steel |
Pole Operated Yoke for DMG SL1 SWITCH and DMG SL1 fixtures, with 28mm baby pin spigot.
|
Size: |
47.4″ x 12.1″ x 4.8″ |
|
Weight: |
6.6lb (3kg) |
|
Material |
Steel |
Yoke for DMG SL1 SWITCH and DMG SL1 lights, hybrid 16mm and 28mm detachable spigot.
|
Size: |
48.3″ x 14.9″ x 3.3″ |
|
Weight: |
6.2lb (2.8kg) |
|
Material |
Steel |
A rigid, wheeled bag that is designed to carry one, fully accessorized DMG SL1 fixture. Constructed for durability, this soft bag is manufactured using a resilient nylon fabric and rugged wheels, with an extendable handle and shoulder straps for easy transport. The DMG SL1 Rigid Bag also features soft interior walls that provide protection for the fixture and its rigid accessories, and a zippered pocket on top for storing DoPchoice accessories.
|
Size (empty): |
49.2″ x 11.8″ x 8.6″ |
|
Weight (empty): |
13.2lb (6kg) |
The most popular diffusion accessory, this Dome accessory slides into the front grooves of a DMG SL1 and DMG SL1 SWITCH. Its round shape provides a large, 160° beam spread, making it the perfect light-softener.
|
Size: |
41.7″ x 7.6″ x 2.4″ (106cm x 19.4cm x 6cm) |
|
Weight: |
1.8lb (0.8kg) |
|
Material: |
Thermo-formed 3mm acrylic. |
This two-leaf barn door accessory attaches to a DMG SL1 and DMG SL1 SWITCH to shape and direct the light output of the fixture. The barn doors quickly and easily attach to the side of the fixture using two spring loaded screws.
|
Size: |
43″ x 8.3″ x 0.3″ |
|
Weight: |
3.3lb (1.5kg) |
|
Material: |
Aluminum fixing solution |
Designed by DoPchoice, the SNAPBAG accessory is a softbox that attaches to the front of a DMG SL1 or a DMG SL1 SWITCH fixture to diffuse its output.
The SNAPBAG features a matte black fabric exterior with a highly reflective interior, and it has four steel tension rods that insert into receivers on the front of the light. The SNAPBAG comes with three diffusion materials (one each: quarter, half, and full) that attache to the SNAPBAG with velcro. Once installed, the SNAPBAG increases the light surface of the fixture, which, effectively, diffuses its light output.
|
Size: |
54″ x 16″ x 10″ |
|
Weight: |
1.5lb (0.7kg) |
Designed by DoPchoice, the SNAPGRID accessory is designed to easily strap around a DMG SL1 or DMG SL1 SWITCH fixture to control the spread of its light output. This fabric eggcrate features a 30° x 50° beam spread and quickly folds up into a compact strip for easy storage and transportation.
|
Size: |
44″ x 8″ x 3″ |
|
Weight: |
1.3lb (0.6kg) |
Designed by DoPchoice, this SNAPGRID accessory is designed to velcro onto a DMG SL1 and DMG SL1 SWITCH SNAPBAG® to control the light spread of the fixture. This fabric eggcrate features a 40°x60° beam spread and quickly folds up into a compact strip for easy storage and transportation.
|
Size: |
53″ x 15″ x 3″ |
|
Weight: |
1.65lb (0.75kg) |
Products on this page may not be available in your region.
DMG SL1 Power, Dimming & Control Accessories
DMG SL1 Mounting Accessories
DMG SL1 Beam Control Accessories
Please complete this form
Required to control the light output of DMG MINI and DMG SL1 lights.
Set lighting technicians know that speed is of the essence when the cameras are rolling. This driver easily controls the DMG SL1 and DMG MINI without complicated menus. Simply choose between five different modes: White Mode, Color Mode, Gel Mode, Effects Mode and Source Match Mode - then adjust the settings of the light as needed.
Mounts onto a DMG MINI or DMG SL1 fixtures using our unique quick-lock system.
|
Input/Output Voltage: |
DMG MINI: 12~35 V |
|
Size: |
8.6″ x 3.3″ x 2.4″ |
|
Weight: |
1lb (0.48kg) |
|
Housing Material: |
PC/ABS |
|
DMX 512 IN/OUT: |
5-Pin XLR |
|
Control Protocols: |
Via Bluetooth using the myMIX app |
An external power supply that mounts on the back of a DMG SL1 or DMG SL1 SWITCH and connects to the fixture using a proprietary 2-pin connector.
|
Max Power Draw: |
200 W |
|
Input Voltage: |
100 to 240 VAC |
|
Output Voltage: |
24 VDC |
|
Size: |
6.7″ x 2.4″ x 18″ |
|
Weight: |
2lb (0.9kg) |
|
Housing Material: |
Plastic Housing and Aluminum Mounting Plate |
Dock for mounting two standard V-mount batteries (maximum 17.5 VDC) to provide a nominal 26 VDC output. For use with DMG MINI™, DMG SL1™, and DMG SL1 SWITCH™ fixtures.
|
Size: |
6.1 x 3.7 x 3.1 |
|
Weight: |
1.4lb (0.64kg) |
|
Housing Material: |
Aluminium |
Battery adaptor plates that accept V-mount or Anton/Bauer® Gold Mount batteries. The plates mount onto Rosco DMG MINI or DMG SL1 fixtures using our unique quick-lock system, and the adapters connect to the fixture using a proprietary 2-Pin connector.
|
Size: |
5.5″ x 3.3″ x 1″ |
|
Weight: |
0.7lb (0.3kg) |
|
Housing Material: |
Black Anodised Aluminum and Stainless Steel Screws. |
Links the DMG SL1 & DMG MINI Driver to the DMG MINI or DMG SL1 fixtures using a proprietary 7-Pin connector. Max distance = 48’ (16m) without power loss.
|
Size: |
6.5’ (2m) |
|
Weight: |
0.44lb (0.2kg) |
|
Sleeving material: |
TRVV |
Connects the DMG SL1 and DMG MINI Driver to the DMG SL1 or DMG MINI light using a proprietary 7-Pin connector.
A 6' (2m) Lamp Extension Cable is also available. Multiple extension cables can be connected together. Max. distance 48' (16m) without power loss.
|
Size: |
25’ (8m) |
|
Weight: |
1.5lb (0.7kg) |
|
Sleeving material: |
TRVV |
Standard 10mm Lollypop male mount featuring 360° single ball head with 16mm receiver.
Maximum Weight Load 20 kg.
Universal mounting plate. Mounts on the back of the DMG MINI™, DMG SL1™, DMG SL1 SWITCH™ & DMG MAXI™.
|
Size: |
1.5″ x 2.3″ x 2.3″ |
|
Weight: |
1.10lb (0.74kg) |
Goose-Neck 16mm Female Receiver with 360° single ball action – ideal for c-stand mounting.
This steel mounting accessory has a maximum capacity of up to 33lbs (15kg).
Mounts onto DMG MINI™, DMG SL1™, and individual DMG MAXI™ fixtures using our unique quick-lock system.
|
Size: |
5.5″ x 3″ x 3″ |
|
Weight: |
2.2lb (1kg) |
A handle that mounts onto DMG MINI™, DMG SL1™, and individual DMG MAXI™ fixtures using our unique quick-lock system.
Made of 100% aluminum, the handle provides a very comfortable hold.
Ideal for any moving situation, or locations where a stand doesn't fit.
|
Size: |
5.9″ x 3.5″ x 2.4″ |
|
Weight: |
0.9lb (0.4kg) |
Hybrid version of the lollypop mount, compatible with 28mm and 16mm standard receivers and spigots.
|
Size: |
6.5″ x 3.1″ x 3.1″ |
|
Weight: |
2.4lb (1.1kg) |
|
Material: |
Aluminium and stainless steel |
Pole Operated Yoke for DMG SL1 SWITCH and DMG SL1 fixtures, with 28mm baby pin spigot.
|
Size: |
47.4″ x 12.1″ x 4.8″ |
|
Weight: |
6.6lb (3kg) |
|
Material |
Steel |
Yoke for DMG SL1 SWITCH and DMG SL1 lights, hybrid 16mm and 28mm detachable spigot.
|
Size: |
48.3″ x 14.9″ x 3.3″ |
|
Weight: |
6.2lb (2.8kg) |
|
Material |
Steel |
A rigid, wheeled bag that is designed to carry one, fully accessorized DMG SL1 fixture. Constructed for durability, this soft bag is manufactured using a resilient nylon fabric and rugged wheels, with an extendable handle and shoulder straps for easy transport. The DMG SL1 Rigid Bag also features soft interior walls that provide protection for the fixture and its rigid accessories, and a zippered pocket on top for storing DoPchoice accessories.
|
Size (empty): |
49.2″ x 11.8″ x 8.6″ |
|
Weight (empty): |
13.2lb (6kg) |
The most popular diffusion accessory, this Dome accessory slides into the front grooves of a DMG SL1 and DMG SL1 SWITCH. Its round shape provides a large, 160° beam spread, making it the perfect light-softener.
|
Size: |
41.7″ x 7.6″ x 2.4″ (106cm x 19.4cm x 6cm) |
|
Weight: |
1.8lb (0.8kg) |
|
Material: |
Thermo-formed 3mm acrylic. |
This two-leaf barn door accessory attaches to a DMG SL1 and DMG SL1 SWITCH to shape and direct the light output of the fixture. The barn doors quickly and easily attach to the side of the fixture using two spring loaded screws.
|
Size: |
43″ x 8.3″ x 0.3″ |
|
Weight: |
3.3lb (1.5kg) |
|
Material: |
Aluminum fixing solution |
Designed by DoPchoice, the SNAPBAG accessory is a softbox that attaches to the front of a DMG SL1 or a DMG SL1 SWITCH fixture to diffuse its output.
The SNAPBAG features a matte black fabric exterior with a highly reflective interior, and it has four steel tension rods that insert into receivers on the front of the light. The SNAPBAG comes with three diffusion materials (one each: quarter, half, and full) that attache to the SNAPBAG with velcro. Once installed, the SNAPBAG increases the light surface of the fixture, which, effectively, diffuses its light output.
|
Size: |
54″ x 16″ x 10″ |
|
Weight: |
1.5lb (0.7kg) |
Designed by DoPchoice, the SNAPGRID accessory is designed to easily strap around a DMG SL1 or DMG SL1 SWITCH fixture to control the spread of its light output. This fabric eggcrate features a 30° x 50° beam spread and quickly folds up into a compact strip for easy storage and transportation.
|
Size: |
44″ x 8″ x 3″ |
|
Weight: |
1.3lb (0.6kg) |
Designed by DoPchoice, this SNAPGRID accessory is designed to velcro onto a DMG SL1 and DMG SL1 SWITCH SNAPBAG® to control the light spread of the fixture. This fabric eggcrate features a 40°x60° beam spread and quickly folds up into a compact strip for easy storage and transportation.
|
Size: |
53″ x 15″ x 3″ |
|
Weight: |
1.65lb (0.75kg) |
Products on this page may not be available in your region.
Products on this page may not be available in your region.
Products on this page may not be available in your region.
Products on this page may not be available in your region.
DMG MINI Power, Dimming & Control Accessories
DMG MINI Mounting Accessories
DMG MINI Beam Control Accessories
Please complete this form
Required to control the light output of DMG MINI and DMG SL1 lights.
Set lighting technicians know that speed is of the essence when the cameras are rolling. This driver easily controls the DMG SL1 and DMG MINI without complicated menus. Simply choose between five different modes: White Mode, Color Mode, Gel Mode, Effects Mode and Source Match Mode - then adjust the settings of the light as needed.
Mounts onto a DMG MINI or DMG SL1 fixtures using our unique quick-lock system.
|
Input/Output Voltage: |
DMG MINI: 12~35 V |
|
Size: |
8.6″ x 3.3″ x 2.4″ |
|
Weight: |
1lb (0.48kg) |
|
Housing Material: |
PC/ABS |
|
DMX 512 IN/OUT: |
5-Pin XLR |
|
Control Protocols: |
Via Bluetooth using the myMIX app |
An external power supply that mounts on the back of a DMG MINI and connects to the fixture using a proprietary 2-pin connector.
|
Max Power Draw: |
100W |
|
Input voltage: |
100-240 VAC |
|
Output voltage: |
24 VDC |
|
Size: |
6.7″ x 2.4″ x 18″ |
|
Weight: |
2lb (0.9kg) |
|
Housing Material: |
Plastic Housing with an Aluminum Mounting Plate |
Dock for mounting two standard V-mount batteries (maximum 17.5 VDC) to provide a nominal 26 VDC output. For use with DMG MINI™, DMG SL1™, and DMG SL1 SWITCH™ fixtures.
|
Size: |
6.1 x 3.7 x 3.1 |
|
Weight: |
1.4lb (0.64kg) |
|
Housing Material: |
Aluminium |
Battery adaptor plates that accept V-mount or Anton/Bauer® Gold Mount batteries. The plates mount onto Rosco DMG MINI or DMG SL1 fixtures using our unique quick-lock system, and the adapters connect to the fixture using a proprietary 2-Pin connector.
|
Size: |
5.5″ x 3.3″ x 1″ |
|
Weight: |
0.7lb (0.3kg) |
|
Housing Material: |
Black Anodised Aluminum and Stainless Steel Screws. |
Links the DMG SL1 & DMG MINI Driver to the DMG MINI or DMG SL1 fixtures using a proprietary 7-Pin connector. Max distance = 48’ (16m) without power loss.
|
Size: |
6.5’ (2m) |
|
Weight: |
0.44lb (0.2kg) |
|
Sleeving material: |
TRVV |
Connects the DMG SL1 and DMG MINI Driver to the DMG SL1 or DMG MINI light using a proprietary 7-Pin connector.
A 6' (2m) Lamp Extension Cable is also available. Multiple extension cables can be connected together. Max. distance 48' (16m) without power loss.
|
Size: |
25’ (8m) |
|
Weight: |
1.5lb (0.7kg) |
|
Sleeving material: |
TRVV |
Standard 10mm Lollypop male mount featuring 360° single ball head with 16mm receiver.
Maximum Weight Load 20 kg.
Universal mounting plate. Mounts on the back of the DMG MINI™, DMG SL1™, DMG SL1 SWITCH™ & DMG MAXI™.
|
Size: |
1.5″ x 2.3″ x 2.3″ |
|
Weight: |
1.10lb (0.74kg) |
Goose-Neck 16mm Female Receiver with 360° single ball action – ideal for c-stand mounting.
This steel mounting accessory has a maximum capacity of up to 33lbs (15kg).
Mounts onto DMG MINI™, DMG SL1™, and individual DMG MAXI™ fixtures using our unique quick-lock system.
|
Size: |
5.5″ x 3″ x 3″ |
|
Weight: |
2.2lb (1kg) |
A handle that mounts onto DMG MINI™, DMG SL1™, and individual DMG MAXI™ fixtures using our unique quick-lock system.
Made of 100% aluminum, the handle provides a very comfortable hold.
Ideal for any moving situation, or locations where a stand doesn't fit.
|
Size: |
5.9″ x 3.5″ x 2.4″ |
|
Weight: |
0.9lb (0.4kg) |
Hybrid version of the lollypop mount, compatible with 28mm and 16mm standard receivers and spigots.
|
Size: |
6.5″ x 3.1″ x 3.1″ |
|
Weight: |
2.4lb (1.1kg) |
|
Material: |
Aluminium and stainless steel |
Pole Operated Yoke for DMG MINI with 28mm baby pin spigot.
|
Size: |
27.5″ x 12.1″ x 4.8″ |
|
Weight: |
5.7lb (2.6kg) |
|
Material: |
Steel |
Yoke for DMG MINI lights, hybrid 16mm and 28mm detachable spigot.
|
Size: |
27.4″ x 14.9″ x 3.3″ |
|
Weight: |
5.5lb (2.5kg) |
|
Material: |
Steel |
A rigid, wheeled bag that is designed to carry one, fully accessorized DMG MINI fixture. Constructed for durability, this soft bag is manufactured using a resilient nylon fabric and rugged wheels, with an extendable handle and shoulder straps for easy transport. The DMG MINI Rigid Bag also features soft interior walls that provide protection for the fixture and its rigid accessories, and a zippered pocket on top for storing DoPchoice accessories.
|
Size (empty): |
28.3″ x 13″ x 13″ |
|
Weight (empty): |
12.3lb (5.6kg) |
The most popular diffusion accessory, this Dome accessory slides into the front grooves of a DMG MINI. Its round shape provides a large, 160° beam spread, making it the perfect light-softener.
|
Size: |
19.8″ x 7.6″ x 2.4″ (50.3cm x 19.4cm x 6cm) |
|
Weight: |
0.9lb (0.4kg) |
|
Material: |
Thermo-formed 3mm acrylic. |
This two-leaf barn door accessory attaches to a DMG MINI to shape and direct the light output of the fixture. The barn doors quickly and easily attach to the side of the fixture using two spring loaded screws.
|
Size: |
19.8″ x 8.3″ x 0.3″ |
|
Weight: |
2.2lb (1 kg) |
|
Material: |
Aluminium fixing solution |
Designed by DoPchoice, the SNAPBAG accessory is a softbox that attaches to the front of a DMG MINI fixture to diffuse its output.
The SNAPBAG features a matte black fabric exterior with a highly reflective interior, and its has four steel tension rods that insert into receivers on the front of the light. The SNAPBAG comes with three diffusion materials (one each: quarter, half, and full) that attach to the SNAPBAG with velcro. Once installed, the SNAPBAG increases the light surface of the fixture, which, effectively, diffuses its light output.
|
Size: |
31″ x 16″ x 10″ |
|
Weight: |
1.23lb (0.56kg) |
Designed by DoPchoice, this octagonal softbox is designed to attach to the front of one DMG MINI fixture using the RABBIT-EARS® 1 accessory or to a pair of DMG MINI fixtures using a RABBIT-EARS® 2 accessory.
The SNAPBAG® Octa 3 features a matte black fabric exterior with a highly reflective interior, and it includes a MAGIC CLOTH® Front Screen and a 1/2 Grid Baffle that attach into place with velcro. Once installed, the SNAPBAG® Octa 3 increases the light surface of the fixture to a 3' (.9M), which, effectively, diffuses its light output.
|
Size: |
39″ x 39″ x 23″ |
|
Weight: |
2.8lb (1.27kg) |
Designed by DoPchoice, this octagonal softbox is designed to attach to the front of one DMG MINI fixture using the RABBIT-EARS® 1 accessory or to a pair of DMG MINI fixtures using a RABBIT-EARS® 2 accessory.
The SNAPBAG® Octa 5 features a matte black fabric exterior with a highly reflective interior, and it includes a MAGIC CLOTH® Front Screen and a 1/2 Grid Baffle that attach into place with velcro. Once installed, the SNAPBAG® Octa 5 increases the light surface of the fixture to a 5' (1.5M), which, effectively, diffuses its light output.
|
Size: |
61″ x 61″ x 25″ |
|
Weight: |
4.54lb (2.06kg) |
Designed by DoPchoice, the SNAPGRID accessory is designed to easily strap around a DMG MINI to control the spread of its light output. This fabric eggcrate features a 30°x50° beam spread and quickly folds up into a compact strip for easy storage and transportation.
|
Size: |
24″ x 9″ x 4″ (60cm x 22cm x 11cm) |
|
Weight: |
0.88lb (0.4kg) |
Designed by DoPchoice, this SNAPGRID accessory is designed to velcro onto a DMG MINI™ SNAPBAG® to control the light spread of the fixture. This fabric eggcrate features a 40°x60° beam spread and quickly folds up into a compact strip for easy storage and transportation.
|
Size: |
33″ x 15″ x 3″ |
|
Weight: |
1.32lb (0.6kg) |
Designed by DoPchoice, the patented RABBIT-EARS 1 softbox fastening system enables users to quickly and easily attach either a SNAPBAG® Octa 3 or a SNAPBAG® Octa 5 onto a single DMG MINI fixture.
The Adapter RABBIT-EARS 1xMINI is also available if you need to connect a generic DoPchoice RABBIT-EARS system to your DMG MINI light.
RABBIT-EARS 1xMINI:
|
Size: |
27″ x 28″ x 2″ |
|
Weight: |
3.97lb (1.8kg) |
Adapter Kit RABBIT-EARS 1xMINI:
|
Size: |
27″ x 28″ x 2″ |
|
Weight: |
4.08lb (1.85kg) |
Designed by DoPchoice, the patented RABBIT-EARS 2 softbox fastening system enables users to quickly and easily attach either a SNAPBAG® Octa 3 or a SNAPBAG® Octa 5 onto a pair of DMG MINI fixtures.
The Adapter RABBIT-EARS 2xMINI is also available if you need to connect a generic DoPchoice RABBIT-EARS system onto two DMG MINI lights.
RABBIT-EARS 2xMINI:
|
Size: |
27″ x 28″ x 2″ (68cm x 72cm x 4cm) |
|
Weight: |
3.97lb (1.8kg) |
Adapter Kit RABBIT-EARS 2xMINI:
|
Size: |
19″ x 8″ x 2″ (48cm x 21cm x 4cm) |
|
Weight: |
3.53lb (1.6kg) |
Products on this page may not be available in your region.
Please complete this form
Products on this page may not be available in your region.
Your request is important to us.
We will respond as soon as possible during regular business hours.
Need help right away? Check out our frequently asked questions page here: FAQs
